Sump Pump Installation & Repair in Orange, CA

At Done-Rite Plumbing and Rooter, we understand the significance of having a fully operational sump pump in your home. Sump pumps play an essential role in preventing basement flooding and shielding your property's foundation from water damage. A well-functioning sump pump ensures that you avoid costly insurance claims related to water damage. This is particularly critical if your property is situated in a lower-lying area prone to flooding. 

When your sump pump runs smoothly, it provides peace of mind, knowing your basement will stay dry throughout the year, regardless of the weather conditions. That's why Done-Rite Plumbing and Rooter is the go-to choice in Orange, CA, for all sump pump installation, repair, and replacement needs. Our team of dedicated professionals is committed to ensuring your sump pump is in optimal condition year-round. After all, we're not just protecting your property. We're safeguarding your tranquility.

How Much Is A Sump Pump?

In choosing a sump pump for your property, it's important to note that there's a vast range of options available, each with different costs:

• Pedestal Sump Pump: These are often more affordable, with prices ranging from $70 to $250. They are installed above the sump pit, with the motor sitting on a pedestal.
• Submersible Sump Pump: More common and effective than pedestal pumps, they are installed within the sump pit and can handle higher water volumes. Prices typically range from $100 to $600 or more, depending on their capacity and features.
• Battery Backup Sump Pump: These pumps add an extra layer of protection and can cost between $200 and $700, depending on the capacity and features of the unit.
• Combination Sump Pump Systems: These systems include both a primary pump and a battery backup pump. Prices can range from $300 to $1,200 or more, depending on capacity and features.
• Water-Powered Sump Pump: An alternative to electric sump pumps, these use your home's water supply to pump out water. Prices typically range from $150 to $400.

As a plumbing company, we at Done-Rite Plumbing and Rooter have exclusive access to high-end sump pumps that are not typically found in stores. These sump pumps are not only higher in quality, likely to last longer, and have fewer issues, but also, the installation process is crucial in preventing future problems. That's why it's important to entrust the job to professionals like us, ensuring it's done right the first time.

How To Install A Sump Pump

Installing a sump pump can seem like an intimidating task, but with careful planning and a little know-how, we can break it down into manageable steps:

1. Choose a Location: We'll first select an ideal location in your basement or crawl space for the sump pit. This location should be as close to the lowest point where water gathers as possible. The pit must be ample enough to house the pump and allow for efficient water collection.
2. Dig the Sump Pit: Next, we'll use a shovel to dig a hole for the sump pit. The depth of the pit will depend on your local water table and the type of pump we're installing. Usually, it's about 2 feet deep and 18 inches in diameter.
3. Install the Sump Pit: The sump pit will then be placed in the hole we've dug. We'll ensure that it's level and stable. If required, we'll use gravel or stone to level the bottom of the pit.
4. Install the Sump Pump: We'll place the sump pump inside the pit, making sure the pump's float switch moves freely and isn't obstructed by the pit walls. If your pump doesn't have a built-in check valve, we'll install one in the discharge pipe to prevent water from flowing back into the pit.
5. Connect the Discharge Pipe: We attach a PVC discharge pipe to the pump's outlet. This pipe will transport the water away from the pit. We'll use PVC fittings as needed to create a watertight connection.
6. Route the Discharge Pipe: The discharge pipe will be directed to a location where the water can be safely discharged, such as a storm drain, dry well, or area away from the foundation. We'll ensure the pipe has a slight slope to encourage proper drainage.
7. Secure the Electrical Wiring: If not already present, we'll install a GFCI-protected electrical outlet near the pit. We'll run the electrical wiring and conduit to the pump and connect it according to the manufacturer's instructions. We'll ensure that the wiring is properly grounded.
8. Test the Sump Pump: We'll fill the pit with water to test the sump pump. The float switch should activate the pump, and it should start removing water from the pit. We'll verify that the pump discharges water through the discharge pipe without any leaks.
9. Finish and Seal: Finally, once the pump is functioning correctly, we'll backfill the pit with gravel or stone, leaving the pump and discharge pipe accessible. We may want to cover the pit with a lid or cover to prevent debris and odors.

Just as you take great care of your home, special attention must also be paid to maintaining your sump pump. It's not just a matter of keeping your basement dry; it's about preserving the structural integrity of your home and your peace of mind. Taking immediate action at the first sign of pump issues is crucial, but equally important is entrusting the task to a reputable professional like Done-Rite Plumbing and Rooter. We understand that a sump pump installation or repair isn't just a one-time job but an investment in your home. Not performing the work correctly the first time can lead to costly repairs down the line. 

At Done-Rite Plumbing and Rooter, we commit to giving you a done-right-the-first-time service, ensuring your sump pump functions flawlessly when you need it most. We don't just fix issues; we build trust and peace of mind. Don't compromise on the safety and comfort of your home. With us, you are in capable, professional hands. Call us!